INCH-POUND
MIL-DTL-85405A(AS)
22 September 1997
SUPERSEDING
MIL-T-85405(AS)
28 July 1980
DETAIL SPECIFICATION
TRAILER, MUNITIONS, MHU-185/M
This specification is approved for use by the Naval Air Systems Command, Department of
the Navy, and is available for use by all Departments and Agencies of the Department of Defense.
1. SCOPE
1.1 Scope. This specification establishes the requirements for the procurement of a
munitions trailer designated as MHU-185/M.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all
specified requirements documents cited in sections 3 and 4 of this specification, whether or not
they are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those listed in the issue of the Department of Defense
Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation
(see 6.2).
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be
of use in improving this document should be addressed to: Commander, Naval Air Warfare Center
Aircraft Division, Code 414100B120-3, Highway 547, Lakehurst, NJ 08733-5100, by using the
Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 1740
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business